EVS IPDirector Version 5.6 - May 2009 Part 5 User's Manual - Manual (Page 56)

IPDirector Version 5.6– User Manual – Part 5: Playout – Player Control Panel
EVS Broadcast Equipment – July 2009
Issue 5.6.F
45
Effect Name Description
Mix In the mix transition, a dissolve effect provides the
transition between the current element and the next
element.
Wipe In the wipe effect, the last frame of the current element
is filled in with the first frame of the next element from
left to right (L-> R) or from the right to the left (R-> L).
C
LIP
T
RANSITION
– T
RANSITION
D
URATION
This right field, the Transition Duration field, makes it possible to specify the
duration of the effect type defined in the Transition Type field The user can
specify the duration, in seconds and frames, up to 20 seconds.
The transition type is only available for effects other than “cut”. By default, the
transition duration is 00s00, hence no transition is applied.
You can modify the value in two possible ways:
• Select the whole value and enter 4 digits following the pattern 00s00: 2 digits
for seconds, 2 digits for frames.
• Select only the 2 digits for the seconds or the 2 digits for the frames and only
modify this part of the value.
2.9.7 E
LEMENT
L
IST
The list of clips included in the playlist is displayed in the Element List area.
F
IELD
D
ESCRIPTION
The following table describes briefly some of the various fields available:
Field Name Description
T/C IN Timecode of the IN point of the playlist element.
Status Indication whether the element is local (on the XT) or