EVS XTnano Version 11.01 - November 2012 Operation Manual - Manual (Page 84)

Issue
11.01.C
nano series Servers - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
76
9.10 Copying Playlists
9.10.1 Introduction
With the XTnano servers, you can copy and move playlists locally.
From the VGA Clip screen, you can perform cut, copy and paste actions with playlists, in
the same way as you do with clips. For more information on these actions, refer to the
section 8.3.12 ‘Moving and Copying Clips’, on page 50.
From the Remote Panel, you can only copy a playlist, but not move (cut & paste) it to
another location.
9.10.2 Copy Options
When you copy a playlist, you have different options:
EDL only or EDL+Clips Copy
• The EDL copy copies only the playlist definition and the playlist elements themselves
remain at the original location.
• The EDL+Clips copy copies the playlist definition and the playlist elements to the
server on which the copy is requested.
Long or Short Copy
When you copy the material of the playlist elements, you can perform a long or short
copy:
• The short copy copies the material between the IN and OUT points of the playlist
elements, with clip guardbands as defined on the destination system.
• The long copy copies the original clips, not only the material defined as the playlist
element. This makes a difference when the playlist element has been trimmed
compared to the original clip.