Multi pgm mode, 1 1/2 pgm modes (press a or b from main menu), 1 secondary menu – EVS XTnano Version 11.01 - November 2012 Operation Manual User Manual

Page 37: Ulti, Secondary menu

nano series Servers - Version 11.01 – Operating Manual

EVS Broadcast Equipment SA – November 2012

Issue

11.01.C

7. Multi PGM Mode

7.1 1/2 PGM modes (press A or B from

Main menu)

Multicam has two modes for its basic operation, 1 PRV/PGM mode or Multi PGM mode:

•

The

1PGM+PRV mode, as described previously, is the more powerful of the two,

allowing interaction between all outputs. Here, synchronized replays can be rolled

and chained between the cameras with either a mix, a wipe, or a cut between them.

•

The

MULTI PGM mode is more basic, which gives the operator independent control

of all outputs.
In this mode, all outputs can be controlled together (such as jogging back to a certain

action, with all outputs) or they can be controlled individually (either PGM 1, or 2).

7.1.1 Secondary Menu

The secondary menu can be called by pressing the

MENU key and is similar to the

1PGM+PRV mode.

PGM1 CAM A *PGM2* CAM B

Aud.Met.

PgmSpd

Post-Roll

Mix.

Sw to IN

Pref

P.1 B.1 Clips: LOCAL Records: LOCAL

PL 11: <

Msg:

Rst Cam

Sync To

PGM 1

PGM 2