EVS XTnano Version 11.01 - November 2012 Operation Manual - Manual (Page 52)

Issue
11.01.C
nano series Servers - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
44
• Remaining capacity on the server (all record trains together)
8.3.3 The Function Bar
The second line displays the available functions. Each function can be called by the
corresponding F_ key of the keyboard, or by clicking with stylus & tablet on the
corresponding area on this line.
F1: Name
This function is used to name a clip. For more information on how to name a clip in the
VGA, refer to the section 8.3.8 ‘How to Name a Clip’, on page 48.
F2: Clip/Cam
This function toggles between CLIP mode and CAM mode.
• In CLIP mode, actions on a clip will use all available cameras for this clip.
• In CAM mode, actions on a clip will only use the selected camera for this clip.
Other functions such as Name, Delete, Copy, Set TC, >Archive depend on this mode
selection.
F3: Call
The operator can gain immediate access to a local or network clip by typing its ID
number.
F4: Pref
This option changes the primary camera of a clip. For information on how to change the
primary camera of a clip, refer to the section 8.3.9 ‘How to Change the Primary Camera
of a Clip’, on page 48.
F5: View
This option changes the standard display to the extended display and vice versa. Refer to
the section 8.3.13 ‘Clip Screen - Extended View’, on page 52.
F10: Playlist
The Playlist screen can be accessed by selecting F10 on the keyboard.