EVS XTnano Version 11.01 - November 2012 Operation Manual - Manual (Page 100)

Issue
11.01.C
nano series Servers - Version 11.01 – Operating Manual
EVS Broadcast Equipment SA – November 2012
92
Unprotected clip
(or non-protected clip)
Clips that users can manually delete via a Delete
action. These clips are however write-protected: they
will never be automatically deleted by the record
train.
VITC Vertical interval timecode (VITC) is a timing signal
that is part of a video recording. It is recorded in the
vertical blanking intervals between successive picture
frames, hence the "vertical interval."
VITC table Timecode jump table in which the user defined
timecode type is stored. This will usually be the VITC
in SD and HANC VITC in HD but could be another
timecode type.