EVS XEDIO Manager Version 4.35 - August 2013 User Manual - Manual (Page 34)

5.2. VTR Manager
A VTR can be used as a source of ingest. The VTR video output must be connected to the
encoder video input.
When you click the VTR Manager button, the VTR Manager window is displayed in the
Work area.
To set VTR parameters, complete the following fields and then click on the Save button.
Field Description
ID Number automatically allocated by the system when you save
the VTR configuration.
Label Name you give to the VTR device.
Description Optional text to describe the VTR device.
Xedio Ingest
Organizer IP IP address of the server hosting the Xedio Ingest Organizer
module controlling the VTR to be used.
Serial COM Port Port used by the workstation when sending data and transport
control commands to the VTR (in RS-422).
Switcher Input Switcher device to which the video source of the VTR is
connected. Leave this field blank if you do not have any switcher
control device supporting Xedio protocol.
5.3. Switcher Manager
When you click the Switcher Manager button, the Switcher Manager window is
displayed in the Work area.
24 5. Machines
EVS Broadcast Equipment SA Issue 4.35.B - August 2013