EVS XEDIO Manager Version 4.35 - August 2013 User Manual - Manual (Page 104)

Allow Export to Target When selected, allows to export the storyboard to a
predefined target.
Allow Text Insertion Allows to insert text.
Output All Stereo to
ST1 Only applicable for “all stereo” edits, not for 5.1.
When selected: all stereo tracks are mixed out to ST1.
Otherwise: ST1 to ST1, ST2 to ST2, ST3 to ST3,…
9.2.13. How to Edit a Parameter Profile
To edit the parameters values of a profile, proceed as follows:
1. In the Application Selection area, select or the application in which a
parameter profile should be edited.
2. Select the profile in the Profile Selection area.
3. In the Parameters area, edit the parameter in the Variant Values column
◦ by selecting or clearing the box corresponding to a parameter (check box)
◦ by adding the required value (field to enter a value)
◦ by selecting the required value (option list)
◦ by defining it in a specific window for a name format string (see section "How to
Modify a Name Format String" on page 95)
◦ for the audio parameters, see section "How to Define New Default Audio Channel
Assignment" on page 97.
The default values can be changed by editing the profile.
4. Click the Save button to save the selected profile.
Note
The modifications from the profile are highlighted in the Parameters
area.
94 9. Softwares
EVS Broadcast Equipment SA Issue 4.35.B - August 2013