EVS XEDIO Manager Version 4.35 - August 2013 User Manual - Manual (Page 19)

The encoder name is added to the list on the left side of the window and "Channel 1"
appears underneath. As the XEDIO I/O model is a multichannel encoder, up to 2 channel
numbers are displayed under the encoder name.
Field Description
Encoder Model Select an encoder model among CDM[1] (also called CDM-
MPEG), CDM[2], XEDIO I/O (also called CDM[3] PCX3)
Encoder
Description Automatically filled at encoder model selection.
Company Automatically filled at encoder model selection.
Number of
Channels Automatically filled at encoder model selection.
Type Automatically filled at encoder model selection.
Label Name you give to the physical encoder, as it will appear in the list.
Preferably choose a name relevant to the job of the encoder or to
its position in the Xedio architecture.
IP Address IP address of the physical encoder.
Description Optional text to describe the encoder. This will appear in a ToolTip
when placing the pointer over the corresponding encoder name in
the list on the left.
3.2.3. Setting up the Encoding Parameters
Introduction
Select a channel ("Channel 1", or "Channel 2" with CDM[3] PCX3) to set the encoding
parameters.
The encoding parameters fields displayed on the right depend on the encoder model.
USER MANUAL Xedio 4.35 Xedio Manager
3. Encoders 9