EVS XEDIO Manager Version 4.35 - August 2013 User Manual - Manual (Page 29)

4.3. EVS Video Server
4.3.1. Introduction
All the EVS Video Servers you want to access through LinX protocol must be referenced
in this category.
The Discover button helps you to “discover” automatically all the EVS Video Server
available on your network. If a server does not appear in the discovery, you can try to
restart the server or check the network path between the local machine and your server
(e.g. mutlicast shall be enabled), If it is still not discovered, then configure the server
manually.
When you click the EVS Video Server button, the EVS Video Server Manager window is
displayed in the Work area.
4.3.2. EVS Server Parameters
To set EVS video server parameters, complete the following fields and then click on the
Save button.
Field/Button Description
Server Name Name of the server to be accessed by Xedio, as you want it to be
displayed in the interface.
Description Optional text to describe the EVS Server.
USER MANUAL Xedio 4.35 Xedio Manager
4. LinX and Direct Access 19