EVS Xsquare Version 2.1 User Manual - Manual (Page 37)

Field Description
The table below describes the various fields and buttons of the Engine area:
Name Description
Online Icon showing the engine (XTAccess) connection status:
when the engine is online
when the engine is offline
when the engine is online, but disabled.
when the engine is offline and disabled.
Disabled Check box you can select to disable an engine, that is to say
to prevent the engine from handling future jobs. The ongoing
jobs are fully processed, then the queued or future jobs will
be handled when the engine will be set online again.
XTA Nickname Name assigned in Xsquare to the XTAccess engine. This a
free-text field.
When you modify the name in this field, it is automatically
adapted in Xsquare user interface.
XTA Location Description of the physical location of the XTAccess
hardware. This a free-text field.
Total Max. Dest. Maximum number of destinations the XTAccess engine can
handle (transcoding jobs included).
The field is read-only, and the value is assigned via the
Orchestration field.
Bear in mind that a job can contain several destinations.
Total Max. Trans. Maximum number of destinations the XTAccess engine can
transcode.
The field is read-only, and the value is assigned via the
Orchestration field.
Orchestration Field from which you can specify the maximum number of
destinations and transcoding jobs the XTAccess can
handled in each cluster it belongs to. When you click the
field, you access a dialog box where you can define the Max.
Dest. and Max. Trans. parameters depending on the cluster.
SN XTAccess serial number (non editable).
Hostname Name of the host computer on which XTAccess is installed.
IP Address IP address(es) of the host computer (non editable).
XTAccess Version XTAccess version number (non editable).
XSecure License XSecure license associated to XTAccess, and expiration
date (non editable). It specifies if no XSecure license is
associated.
USER MANUAL Xsquare 2.1
3. Configuration 31