EVS Xsquare Version 2.1 User Manual - Manual (Page 33)

Working Process
In the Orchestration window, you will usually work in the following order:
1. Creating the required clusters in the Cluster area. See section "Managing Engine
Clusters" on page 35.
2. Specifying the cluster settings whenever required or requested in the Selected Cluster
Information area. See section "Selected Cluster Information Area" on page 32.
3. Setting the engine orchestration parameters and others in the Engine area. See
section "Configuring Engines" on page 37.
4. Save the whole orchestration configuration.
3.1.4. Cluster Area
Introduction
The Cluster area in the Orchestration window shows the engine clusters defined in
Xsquare, and the engines associated to each cluster.
The cluster position in the list determines the cluster priority in handling a specific job
type: if the same job type is distributed between two clusters, the cluster positioned higher
in the list will handle the shared job type in priority.
You manage the clusters from the Cluster area of the Orchestration window. See section
"Managing Engine Clusters" on page 35 for more information on managing clusters.
The following illustration presents a single cluster box, not the whole cluster area that can
consists of several cluster boxes, depending on the number of clusters defined.
USER MANUAL Xsquare 2.1
3. Configuration 27