EVS Xsquare Version 2.1 User Manual - Manual (Page 14)

Field Description
The table below describes the fields in the Target window:
GUI Element Description
Target Name field Name of the Target that will appear in the EVS application where
the Target is available
Template field Job template to be associated to the Target
The button allows users to open the displayed job
template, and create a customized job template based on it.
Destination Name
field Name of the destination. It is stored in the job template and is
automatically filled in when you select the job template
Destination field Physical location where the processed material has to be stored.
See section "Job Destination Parameters" on page 19 for more
information on this field.
Owner field Logon of the user who has created the Target. Non editable field
only available for users logged as administrators.
+ button
(Add button) Button that allows users to add a Target
- button
(Remove button) Button that allows users to remove the selected Target
Refresh button Button that allows users to refresh the window display
2.2.2. Defining a Target
Introduction
Adding a Target in Xsquare will automatically make this Target available in the client
application. No other configuration is required.
Note
See section "Target Window" on page 7 for additional information on the field
values specified in this procedure.
Prerequisites
Before adding a Target, you must share the folder the processed files will be sent to.
8 2. Job Initiators
EVS Broadcast Equipment S.A. Issue 2.1.A June 2013