Bosch GCM 12 JL Professional - Manual (Page 29)

English | 29
Bosch Power Tools 1 619 929 L91 | (6.8.12)
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
Intended Use
The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in hard and soft-
wood, as well as in particle and fibre board. In this, mitre an-
gles from –52° to +52° as well as bevel angles from –2° to
+47° are possible.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.
Product Features
The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Dust bag
2 Extraction adapter
3 Auxiliary transport handle
4 Handle
5 Retracting blade guard
6 Fence
7 Movable distance-stop
8 Mounting holes
9 Locking knob for various mitre angles
10 Mitre detent lever
11 Mitre detent override
12 Mitre angle indicator
13 Scale for mitre angle
14 Clamping lever of the saw-table extension
15 Saw-Table extension
16 Recessed handles
17 Allen key (6 mm/4 mm)
18 Adjustable fence
19 Stop for 45° and 33.9° standard bevel angle
20 Transport safety-lock
21 Spindle lock
22 Lever for releasing the tool arm
23 Clamping lever for any bevel angle
24 Scale for bevel angle
25 Indicator for bevel angle
26 Stop for 0° standard bevel angle
27 Material stop
28 Lock screw of the material stop
29 Detents for standard mitre angles
30 Saw table
31 Laser on/off switch (for marking of cutting line)
32 Laser warning label
33 On/Off switch
34 Blade guard
35 Laser protection cap
36 Cover plate
37 Saw blade
38 Roller
39 Insert plate
40 Material clamp
41 Clamping lever of the adjustable fence
42 Mounting holes for material clamp
43 Chip deflector
44 Transport handle
45 Sawdust ejector
46 Front fastening screw
(cover plate/retracting blade guard)
47 Allen screw (size 6 mm) for mounting of saw blade
48 Clamping flange
49 Interior clamping flange
50 Cover plate tab
51 Threaded rod
52 Wing bolt
53 Clamping screw of the material stop
54 Screws for insert plate
55 Adjustment screw for laser position
(parallelism)
56 Screw for bevel angle indicator
57 Stop screw for 0° bevel angle
58 Stop screw for 45° bevel angle
59 Set screws of scale 13 for mitre angles
60 Screw for mitre angle indicator
61 Velcro strap
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
For adjustment of random mi-
tre angles, the saw table must
move freely and the mitre de-
tent override must be
blocked:
– Pull lever n and at the
same time push the mitre
detent override o down-
ward at the front.
Clamping lever shut:
The set bevel angle of the tool
arm is locked.
Clamping lever open:
Adjusting bevel angles is pos-
sible.
Symbols and their meaning
OBJ_BUCH-1600-002.book Page 29 Monday, August 6, 2012 3:36 PM