ZyXEL Communications P-334WHD - Manual (Page 85)

P-334WHD User’s Guide
Chapter 5 Wireless Tutorial 85
C
H A P T E R
5
Wireless Tutorial
This chapter gives you examples of how to set up an access point and wireless client for
wireless communication using the following parameters. The wireless clients can access the
Internet through an AP wirelessly.
5.1 Example Parameters
SSID SSID_Example3
Channel Auto
Security WPA-PSK
(Pre-Shared Key: ThisismyWPA-PSKpre-sharedkey)
802.11 mode IEEE 802.11b/g
An access point (AP) or wireless router is referred to as “AP” and a computer with a wireless
network card or USB/PCI adapter is referred to as “wireless client” here.
We use the P-334WH web screens and M-302 utility screens as an example. The screens may
vary slightly for different models.
5.2 Configuring the AP
Follow the steps below to configure the wireless settings on your AP.
1 Make sure the ZyXEL Device is set to router mode or access point mode in the
Maintenance > Sys OP Mode screen.
2 Open the Wireless LAN > General screen in the AP’s web configurator.