ZyXEL Communications P-334WHD - Manual (Page 47)

P-334WHD User’s Guide
Chapter 2 Introducing the Web Configurator 47
NAT General Use this screen to enable NAT.
Application Use this screen to configure servers behind the ZyXEL Device.
Advanced Use this screen to change your ZyXEL Device’s port triggering settings.
DDNS General Use this screen to set up dynamic DNS.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services This screen shows a summary of the firewall rules, and allows you to edit/
add a firewall rule.
Content Filter Filter Use this screen to block certain web features and sites containing certain
keywords in the URL.
Schedule Use this screen to set the days and times for the ZyXEL Device to perform
content filtering.
Management
Static Route IP Static Route Use this screen to configure IP static routes.
Bandwidth
MGMT
General Use this screen to enable bandwidth management.
Advanced Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
Monitor Use this screen to view the ZyXEL Device’s bandwidth usage and
allotments.
Remote MGMT WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the ZyXEL Device.
Telnet Use this screen to configure through which interface(s) and from which IP
address(es) users can use Telnet to manage the ZyXEL Device.
FTP Use this screen to configure through which interface(s) and from which IP
address(es) users can use FTP to access the ZyXEL Device.
DNS Use this screen to configure through which interface(s) and from which IP
address(es) users can send DNS queries to the ZyXEL Device.
UPnP General Use this screen to enable UPnP on the ZyXEL Device.
Maintenance
System General This screen contains administrative.
Time Setting Use this screen to change your ZyXEL Device’s time and date.
Logs View Log Use this screen to view the logs for the categories that you selected.
Log Settings Use this screen to change your ZyXEL Device’s log settings.
Tools Firmware Use this screen to upload firmware to your ZyXEL Device.
Configuration Use this screen to backup and restore the configuration or reset the factory
defaults to your ZyXEL Device.
Restart This screen allows you to reboot the ZyXEL Device without turning the
power off.
Config Mode General This screen allows you to display or hide the advanced screens or features.
Sys OP Mode General This screen allows you to configure and have the ZyXEL Device work as a
router, access point or WiFi WAN router.
Table 9 Screens Summary
LINK TAB FUNCTION