ZyXEL Communications P-334WHD - Manual (Page 66)

P-334WHD User’s Guide
66 Chapter 3 Connection Wizard
Figure 29 Wizard Step 3: WAN MAC Address
The following table describes the fields in this screen.
Table 24 Wizard Step 3: WAN MAC Address
LABEL DESCRIPTION
Factory Default Select Factory Default to use the factory assigned default MAC address.
Clone the
computer’s MAC
address
Select this option and enter the IP address of the computer on the LAN whose
MAC you are cloning. It is advisable to clone the MAC address from a computer
on your LAN even if your ISP does not presently require MAC address
authentication.
Set WAN MAC
Address
Select this option and enter the MAC address you want to use.
Back Click Back to return to the previous screen.
Next Click Next to continue.
Exit Click Exit to close the wizard screen without saving.
3.4.9 Modem Dial-up Connection as A Backup WAN
If you selected Ethernet, PPPoE or PPTP to set up a broadband WAN connection, you can
use this screen to set up a dial-up connection as a backup WAN. Otherwise, leave the default
settings and skip to the next step.