5 configuring sua server, Figure 34 nat mode, Table 21 nat mode – ZyXEL Communications Prestige 2602R Series User Manual
Page 97
Prestige 2602R Series User’s Guide
Chapter 6 Network Address Translation (NAT) Screens
97
Figure 34 NAT Mode
The following table describes the labels in this screen.
6.5 Configuring SUA Server
If you do not assign an IP address in Server Set 1 (default server) the Prestige discards all
packets received for ports that are not specified here or in the remote management setup.
Click NAT, select SUA Only and click Edit Details to open the following screen.
for port numbers commonly used for particular services.
Table 21 NAT Mode
LABEL
DESCRIPTION
None
Select this radio button to disable NAT.
SUA Only
Select this radio button if you have just one public WAN IP address for your Prestige.
The Prestige uses Address Mapping Set 1 in the NAT - Edit SUA/NAT Server Set
screen.
Edit Details
Click this link to go to the NAT - Edit SUA/NAT Server Set screen.
Full Feature
Select this radio button if you have multiple public WAN IP addresses for your Prestige.
Edit Details
Click this link to go to the NAT - Address Mapping Rules screen.
Apply
Click Apply to save your configuration.