ZyXEL Communications Prestige 2602R Series - Manual (Page 239)

Prestige 2602R Series User’s Guide
Chapter 23 Menu 3 LAN Setup 239
C
H A P T E R
23
Menu 3 LAN Setup
This chapter covers how to configure your wired Local Area Network (LAN) settings.
23.1 LAN Setup
This section describes how to configure the Ethernet using Menu 3 — LAN Setup. From the
main menu, enter 3 to display menu 3.
Figure 119 Menu 3 LAN Setup
23.1.1 General Ethernet Setup
This menu allows you to specify filter set(s) that you wish to apply to the Ethernet traffic. You
seldom need to filter Ethernet traffic; however, the filter sets may be useful to block certain
packets, reduce traffic and prevent security breaches.
Figure 120 Menu 3.1 LAN Port Filter Setup
If you need to define filters, please read Chapter 30 on page 285 first, then return to this menu
to define the filter sets.
Menu 3 - LAN Setup
1. LAN Port Filter Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Menu 3.1 - LAN Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel: