ZyXEL Communications Prestige 2602R Series - Manual (Page 51)

Prestige 2602R Series User’s Guide
Chapter 2 Introducing the Web Configurator 51
C
H A P T E R
2
Introducing the Web
Configurator
This chapter describes how to access and navigate the web configurator.
2.1 Web Configurator Overview
The web configurator is an HTML-based management interface that allows easy Prestige
setup and management via Internet browser. Use Internet Explorer 6.0 and later or Netscape
Navigator 7.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See the Troubleshooting chapter if you need to make sure these functions are allowed in
Internet Explorer.
2.1.1 Accessing the Prestige Web Configurator
1 Make sure your Prestige hardware is properly connected (refer to the Quick Start Guide).
2 Prepare your computer/computer network to connect to the Prestige (refer to the Quick
Start Guide).
3 Launch your web browser.
4 Type "192.168.1.1" as the URL.
5 An Enter Network Password window displays. Enter the user name (“admin” is the
default), password (“1234” is the default). Click Login to proceed to a screen asking you
to change your password. Click Reset to revert to the default password in the password
field