beautypg.com

2 europe type supplementary phone services, 1 european call hold, 2 european call waiting – ZyXEL Communications Prestige 2602R Series User Manual

Page 120: Table 31 european flash key commands, Europe type supplementary phone services

background image

Prestige 2602R Series User’s Guide

120

Chapter 8 Voice Screens

8.10.2

Europe Type Supplementary Phone Services

This section describes how to use supplementary phone services with the Europe Type Call
Service Mode
. Commands for supplementary services are listed in the table below.

After pressing the flash key, if you do not issue the sub-command before the default sub-
command timeout (2 seconds) expires or issue an invalid sub-command, the current operation
will be aborted.

8.10.2.1 European Call Hold

Call hold allows you to put a call (A) on hold by pressing the flash key.

If you have another call, press the flash key and then “2” to switch back and forth between
caller A and B by putting either one on hold.

Press the flash key and then “0” to disconnect the call presently on hold and keep the current
call on line.

Press the flash key and then “1” to disconnect the current call and resume the call on hold.

If you hang up the phone but a caller is still on hold, there will be a remind ring.

8.10.2.2 European Call Waiting

This allows you to place a call on hold while you answer another incoming call on the same
telephone (directory) number.

If there is a second call to a telephone number, you will hear a call waiting tone. Take one of
the following actions.

• Reject the second call.

Table 31 European Flash Key Commands

COMMAND

SUB-COMMAND

DESCRIPTION

Flash

Put a current call on hold to place a second call.
Switch back to the call (if there is no second call).

Flash

0

Drop the call presently on hold or reject an incoming call which is

waiting for answer.

Flash

1

Disconnect the current phone connection and answer the incoming

call or resume with caller presently on hold.

Flash

2

1. Switch back and forth between two calls.
2. Put a current call on hold to answer an incoming call.
3. Separate the current three-way conference call into two

individual calls (one is on-line, the other is on hold).

Flash

3

Create three-way conference connection.

Flash

*98#

Transfer the call to another phone.