ZyXEL Communications Prestige 2602R Series - Manual (Page 55)

Prestige 2602R Series User’s Guide
Chapter 2 Introducing the Web Configurator 55
UPnP Use this screen to enable UPnP on the Prestige.
Logs Log Settings Use this screen to change your Prestige’s log settings.
View Log Use this screen to view the logs for the categories that you
selected.
Media Bandwidth
Management
Summary Use this screen to allocate an interface's outgoing capacity to
specific types of traffic.
Class Setup Use this screen to define a bandwidth class.
Monitor Use this screen to view bandwidth class statistics.
Maintenance
System Status This screen contains administrative and system-related
information.
DHCP Table This screen displays DHCP (Dynamic Host Configuration
Protocol) related information and is READ-ONLY.
Any IP Table This screen lists the devices that are using the Any IP feature to
communicate with the Prestige.
Diagnostic General These screens display information to help you identify problems
with the Prestige general connection.
DSL Line These screens display information to help you identify problems
with the DSL line.
Firmware Use this screen to upload firmware to your Prestige or reset the
factory defaults to your Prestige.
Table 3 Web Configurator Screens Summary (continued)
LINK SUB-LINK FUNCTION