ZyXEL Communications Prestige 2602R Series - Manual (Page 435)

Prestige 2602R Series User’s Guide
Appendix K Log Descriptions 435
The following table shows RFC-2408 ISAKMP payload types that the log displays. Please
refer to the RFC for detailed information on each type.
Log Commands
Go to the command interpreter interface ( Appendix H on page 421 explains how to access and
use the commands).
Configuring What You Want the Prestige to Log
1 Use the sys logs load command to load the log setting buffer that allows you to
configure which logs the Prestige is to record.
Table 166 FSM Logs: Callee Side
LOG MESSAGE DESCRIPTION
VoIP Call Start from
SIP[SIP Port Number] A VoIP phone call came to the Prestige from the listed SIP
number.
VoIP Call Established
Ph[Phone Port] <- Outgoing
Call Number A VoIP phone call was set up from the listed SIP number to the
Prestige.
VoIP Call End Phone[Phone
Port] A VoIP phone call that came into the Prestige has terminated.
Table 167 RFC-2408 ISAKMP Payload Types
LOG DISPLAY PAYLOAD TYPE
SA Security Association
PROP Proposal
TRANS Transform
KE Key Exchange
ID Identification
CER Certificate
CER_REQ Certificate Request
HASH Hash
SIG Signature
NONCE Nonce
NOTFY Notification
DEL Delete
VID Vendor ID