beautypg.com

12 dos thresholds, Figure 68 firewall: anti probing, Table 48 firewall: anti probing – ZyXEL Communications Prestige 2602R Series User Manual

Page 166

background image

Prestige 2602R Series User’s Guide

166

Chapter 13 Firewall Configuration

Figure 68 Firewall: Anti Probing

The following table describes the labels in this screen.

13.12 DoS Thresholds

For DoS attacks, the Prestige uses thresholds to determine when to drop sessions that do not
become fully established. These thresholds apply globally to all sessions.

You can use the default threshold values, or you can change them to values more suitable to
your security requirements.

Table 48 Firewall: Anti Probing

LABEL

DESCRIPTION

Respond to PING

on

The Prestige does not respond to any incoming Ping requests when Disable is

selected.
Select LAN to reply to incoming LAN Ping requests.
Select WAN to reply to incoming WAN Ping requests.
Otherwise select LAN & WAN to reply to both incoming LAN and WAN Ping

requests.

Do not respond to

requests for

unauthorized

services.

Select this option to prevent hackers from finding the Prestige by probing for

unused ports. If you select this option, the Prestige will not respond to port

request(s) for unused ports, thus leaving the unused ports and the Prestige

unseen. By default this option is not selected and the Prestige will reply with an

ICMP Port Unreachable packet for a port probe on its unused UDP ports, and a

TCP Reset packet for a port probe on its unused TCP ports.
Note that the probing packets must first traverse the Prestige 's firewall

mechanism before reaching this anti-probing mechanism. Therefore if the firewall

mechanism blocks a probing packet, the Prestige reacts based on the firewall

policy, which by default, is to send a TCP reset packet for a blocked TCP packet.

You can use the command "sys firewall tcprst rst [on|off]" to change this policy.

When the firewall mechanism blocks a UDP packet, it drops the packet without

sending a response packet.

Back

Click Back to return to the previous screen.

Apply

Click Apply to save your changes back to the Prestige.

Cancel

Click Cancel to begin configuring this screen afresh.