ZyXEL Communications Prestige 2602R Series - Manual (Page 287)

Prestige 2602R Series User’s Guide
Chapter 30 Filter Configuration 287
30.2 Configuring a Filter Set for the Prestige
To configure a filter set, follow the steps shown next.
1 Enter 21 in the main menu to display Menu 21 – Filter and Firewall Setup.
2 Enter 1 to display Menu 21.1 – Filter Set Configuration as shown next.
Figure 169 Menu 21 Filter Set Configuration
3 Type the filter set to configure (no. 1 to 12) and press [ENTER] .
4 Type a descriptive name or comment in the Edit Comments field and press [ENTER].
5 Press [ENTER] at the message “ Press ENTER to confirm…” to display Menu 21.1.1 –
Filter Rules Summary (that is, if you selected filter set 1 in menu 21.1).
Menu 21.1 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 _______________ 7 _______________
2 NetBIOS_WAN 8 _______________
3 NetBIOS_LAN 9 _______________
4 IGMP 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel: