beautypg.com

4 internet access wizard setup: fourth screen – ZyXEL Communications Prestige 2602R Series User Manual

Page 63

background image

Prestige 2602R Series User’s Guide

Chapter 3 Wizard Setup

63

3.1.4 Internet Access Wizard Setup: Fourth Screen

Verify the settings in the screen shown next. To change the LAN information on the Prestige,
click Change LAN Configurations. Otherwise click Save Settings to save the configuration
and skip to the section 3.13.

REGISTER Server Port Enter the SIP register server’s listening port for SIP in this field.

Note: If you were not given a register server port, then enter the

port from the SIP Server Port field again here.

SIP Service Domain

Enter the SIP service domain name in this field (the domain name that comes

after the @ symbol in a full SIP URI). You can use up to 127 ASCII Extended

set characters.

Authentication User ID This is the user name for registering this SIP account with the SIP register

server. Type the user name exactly as it was given to you. You can use up to

95 ASCII characters.

Authentication

Password

Type the password associated with the user name above. You can use up to

95 ASCII Extended set characters.

Send Caller ID

Select this check box to show identification information when you make VoIP

phone calls. Clear the check box to not show identification information when

you make VoIP phone calls.

Back

Click Back to go back to the previous screen.

Next

Click Next to continue to the next wizard screen.

Table 9 Wizard Setup: Voice Configuration (continued)

LABEL

DESCRIPTION