Xerox 6400 - Manual (Page 85)

Scanning
80 Xerox 6400 Scanner User’s Guide
To set the image size:
1. Select the image size from the menu, or click on the image and
drag a box around the area you want.
The dotted outline shows the selected area in the image.
The following figure shows an example of a manually selected
area.
Note that the selected area in the example has the number “1”
in its upper left corner indicating it is your first selected area.
You can select up to six separate areas on an image at a time.
You can now move or resize the outline to select the specific
area you want to scan.
2. To move the dotted outline, put the pointer in the selected area
and drag the mouse.
3. To resize the selected area, put the pointer on a dotted line and
drag it.
Note that as you drag a dotted line, the menu selection for the
image size changes to Custom to indicate you are customizing
the size.
The Scan Info box on the lower left portion of the Advanced
Interface shows the information for the new area. If you
selected multiple areas, tabs on the Scan Info box represent
each area. Click on an area’s tab to see its Scan Info.
4. If the dotted line is not exactly where you want it, put the pointer
on the line and drag the mouse.
The Scan Info box shows the
size and position of the area.
The selected scan area.
This is the image that appears
on the PaperPort desktop
when scanning is finished.