Xerox 6400 - Manual (Page 78)

Xerox 6400 Scanner User’s Guide 73
Scanning
2. Click the Properties button.
Your scanner has a built-in power saving feature that is set to
power down after 15 minutes of idle time. You can set the lamp
timeout from 10 minutes to a maximum of 10 hours.
3. Click the arrows for the Lamp timeout setting to choose a time
setting.
To turn the lamp on and off manually without turning off power
to the scanner, click the Lamp On or Lamp Off buttons. To
manually turn on the Transparency Adapter lamp, click TA
Lamp On. To turn off the TA Lamp, choose Scan Reflective
Using on the PaperPort Advanced Interface.
To return the scanner to its factory settings, click Reset Device.
4. Click OK to save the changes and close the dialog box.