Xerox 6400 - Manual (Page 37)

Scanning
32 Xerox 6400 Scanner User’s Guide
When You’re Finished Scanning Transparencies
1. Remove any slides or filmstrips from the slide holder.
2. Replace the empty filmstrip holder into the slide holder.
3. Replace the white cover plate.
4. Later, when you re-open the Advanced Interface, make sure to
choose Scan Reflective Using to reset PaperPort for scanning
paper items.
If you adjusted the resolution and other settings for the slides or
negatives, reset those settings for scanning paper items.
Replace the empty filmstrip
holder in the slide holder,
then replace the cover plate.
Replace the empty filmstrip
holder in the slide holder,
then replace the cover plate.
Choose Scan Reflective
Using to reset for
scanning paper items.