Xerox 6400 - Manual (Page 35)

Scanning
30 Xerox 6400 Scanner User’s Guide
To scan a 35mm slide or negative:
1. Start the PaperPort software.
2. Click the Scan icon on the PaperPort command bar.
The Folders pane is replaced by the Scan pane.
3. From the Scanner list, choose Xerox 6400.
4. In the “Scan what?” section, choose Photograph.
5. Click the Scan button on the Scan pane.
The Basic Interface or Advanced Interface opens, depending
on which one you used last. That is, if you used the Advanced
Interface the last time you scanned from PaperPort, then it will
open.
You can scan transparencies only from the Advanced Interface.
6. If the Basic Interface appears, click the Advanced Interface
button.
Scan pane Choose Xerox 6400 from here