Xerox 6400 - Manual (Page 8)

Xerox 6400 Scanner User’s Guide 3
Welcome
Document cover—Protects the document from light and
contamination.
Transparency light source cover—Removable cover that
protects the transparency light source underneath it. Leave the
cover in place to scan paper items. Remove to scan
transparencies. When uncovered, the light source shines light
through the 35mm slide or negative transparency and then through
the glass onto the scanning sensors in the body of the scanner.
Locking tab—Protects the scanner’s scan head by holding it
securely in position. The locking tab must be unlocked before
scanning. The scanner will not scan when locked.
Alignment corner—Items are aligned at the upper-right corner.
Glass—Items are placed face down on the glass.
Reference marks—Marks on the border of the glass show where
to align various paper sizes.
One Touch Button panel—Allows scanning directly from the
scanner.
Status lights—Shows the scanner’s status. Green light: scanner is
ready to scan. Red light: scanner is busy, or an error has occurred.
USB port—Connects the scanner to the computer. Your Xerox
6400 scanner can connect to either a USB 1.1 or a USB 2.0 port.
Power jack—Connects the power cord to the scanner.
Option port—Connects the TPA cable to the scanner.
On/Off switch—Turns power to the scanner on and off.
TPA (Transparency Adapter) cable—Supplies power from the
scanner body to the transparency light source.