Xerox 6400 - Manual (Page 23)

Scanning
18 Xerox 6400 Scanner User’s Guide
Scan from the One Touch Button Panel
Scanning from the One Touch Button panel on the screen works
just like pressing a scanner button. The scanner scans the item,
and then sends the image to the destination associated with the
button. This method of scanning is especially helpful if the scanner
is not located close to your computer.
To scan from the One Touch Button panel on the screen:
1. Place an item face down on the glass. Align the edge of the
item with the arrow marker at the upper-right corner of the
glass.
2. Close the document cover and click on the One Touch icon in
the Windows System Tray (at the bottom right corner of the
screen).
The One Touch Button Panel appears and shows the icons
representing the scanner’s buttons.
3. On the screen—not on the scanner—click the button you want
to use to scan.
The scanner starts scanning the item. When the scan is
complete, the scanned image appears in the destination
application.
The One Touch Icon
For example, if you want to
scan and have the scanned
image attached to a blank
Email message, click here.
Or if you want to scan and have the
scanned image ready to be burned to
a CD, click here.