ZyXEL Communications Prestige 643 - Manual (Page 97)

Prestige 643 ADSL Router
Bridging Setup 7-5
Figure 7-4 Menu 12.3.1 - Edit Bridge Static Route
The following table describes the Edit Bridge Static Route menu.
Table 7-3 Edit Bridge Static Route Menu Fields
FIELD DESCRIPTION
Route # This is the index number of the route as listed in Menu 12.3-Bridge Static Route
Setup.
Route Name Enter a name for the bridge static route for identification purposes.
Active Indicates whether the static route is active or not.
Ether Address Enter the MAC address of the destination machine that you wish to bridge the packets
to.
IP Address If available, enter the IP address of the destination machine that you wish to bridge the
packets to.
Gateway Node Enter the number of the remote node that is the gateway of this static route.
Once you have completed filling in this menu, press [ ENTER ] at the message “Press ENTER to
Confirm…” to save your configuration, or press [ ESC ] to cancel.
Menu 12.3.1 - Edit Bridge Static Route
Route #: 1
Route Name= ?
Active= No
Ether Address= ?
IP Address=
Gateway Node= 1
Press ENTER to Confirm or ESC to Cancel: