ZyXEL Communications Prestige 643 - Manual (Page 133)

Prestige 643 ADSL Router
System Maintenance 10-7
Figure 10-8 Menu 24.3.2 - System Maintenance - Syslog and Accounting
You need to configure the UNIX syslog parameters described in the following table to activate syslog then
choose what you want to log.
Table 10-3 System Maintenance Menu Syslog Parameters
FIELD DESCRIPTION
UNIX Syslog:
Active Choose Yes to turn on or No to turn off syslog.
Syslog IP Address Enter the IP Address of the server that will log the CDR (Call Detail Record) and
system messages i.e., the syslog server.
Log Facility Choose Local 1, Local 2, Local 3, Local 4, Local 4, Local 5, Local 6 or Local 7.
The log facility allows you to log the message in different files in the server. Please
refer to your UNIX manual for more detail.
Types:
CDR Call Detail Record (CDR) logs all data phone line activity if set to Yes.
Packet triggered The first 48 bytes or octets and protocol type of the triggering packet is sent to the
UNIX syslog server when this field is set to Yes.
Filter log Choose No to log no filters; choose Yes to log filters.
PPP log PPP events are logged when this field is set to Yes.
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= ?
Log Facility= Local 1
Types:
CDR= No
Packet triggered= No
Filter log= No
PPP log= No
Press ENTER to Confirm or ESC to Cancel:
Press Space Bar to Toggle.