ZyXEL Communications Prestige 643 - Manual (Page 67)

Prestige 643 ADSL Router
Remote Node Configuration 4-3
select PPP encapsulation instead of RFC-1483, so you do not need to reconfigure either machine when the
time comes.
Scenario 3. Multiple VCs
If you have an equal number (or more) of VCs than the number of protocols, then select RFC-1483
encapsulation and VC-based multiplexing.
When Menu 11.1 – Remote Node Profile appears, fill in the fields as described in the following table to
define this remote profile.
Figure 4-2 Menu 11.1 - Remote Node Profile
The Remote Node Profile Menu Fields table, shown next, explains how to configure the Remote Node
Menu.
Table 4-1 Remote Node Profile Menu Fields
FIELD DESCRIPTION EXAMPLE
Rem Node Name This is a required field. Enter a descriptive name for the
remote node. This field can be up to eight characters.
This name must be unique from any other remote node
name or remote dial-in user name. Corp
Menu 11.1 - Remote Node Profile
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= PPP
Multiplexing= LLC-based
Incoming:
Rem Login=
Rem Password= ********
Outgoing:
My Login=
My Password= ********
Authen= CHAP/PAP
Route= IP
Bridge= No
Edit PPP Options= No
Rem IP Addr= 0.0.0.0
Edit IP/IPX/Bridge= No
Session Options:
Edit Filter Sets= No
PPPoE Idle Timeout(sec)= N/A
PPPoE Service Name= N/A
Schedule Sets= N/A
Press ENTER to Confirm or ESC to Cancel:
Enter a
unique name
of 8 or less
characters for
the Remote
Node Name.
Enter the IP
Address of
the Remote
Gateway