ZyXEL Communications Prestige 643 - Manual (Page 80)

Prestige 643 ADSL Router
5-8 Remote Node TCP/IP Configuration
Figure 5-7 Menu 12.1 - IP Static Route Setup
Step 3. In Menu 12.1, enter the index number of one of the static routes that you want to configure.
Index number 1 was selected for the following figure.
Figure 5-8 Edit IP Static Route
The following table describes the fields for Menu 12.1 - Edit IP Static Route Setup.
Table 5-3 Edit IP Static Route Menu Fields
FIELD DESCRIPTION
Route # This is the index number of the static route that you chose in Menu 12.1.
Route Name Enter a descriptive name for this route. This is for identification purpose only.
Active This field allows you to activate/deactivate this static route.
Menu 12.1 - IP Static Route Setup
1. routename
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ________
Enter selection number:
Menu 12.1.1 - Edit IP Static Route
Route #: 1
Route Name=
Active= No
Destination IP Address= 0.0.0.0
IP Subnet Mask= 0.0.0.0
Gateway IP Address= 0.0.0.0
Metric= 2
Private= No
Press ENTER to Confirm or ESC to Cancel: