ZyXEL Communications Prestige 643 - Manual (Page 56)

Prestige 643 ADSL Router
3-14 Internet Access
Figure 3-8 Internet Access Setup
The following table contains instructions on how to configure your Prestige for Internet access.
Table 3-5 Internet Access Setup Menu Fields
FIELD DESCRIPTION EXAMPLE
ISP’s Name Enter the name of your Internet Service Provider. This
information is for identification purposes only. MyISP
Encapsulation Press [ SPACE BAR ] to select the method of encapsulation
used by your ISP. Choices are PPPoE, PPP, RFC 1483 or
ENET ENCAP.
ENET ENCAP
Multiplexing Press [ SPACE BAR ] to select the method of multiplexing
used by your ISP. Choices are VC-based or LLC-based.
VC-based
VPI # Enter the Virtual Path Identifier (VPI) that the telephone
company gives you. 0
VCI # Enter the Virtual Channel Identifier (VCI) that the telephone
company gives you. 35
Service Name This is valid only when you have chosen PPPoE
encapsulation. If you are using PPPoE encapsulation, then
type the name of your PPPoE service here.
My Login Enter the login name that your ISP gives you. If you are using
PPPoE encapsulation, then this field must be of the form
user@domain where domain identifies your ISP.
Derek
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= ENET ENCAP
Multiplexing= LLC-based
VPI #= 0
VCI #= 35
Service Name= N/A
Login= N/A
My Password= ********
Single User Account= Yes
IP Address Assignment= Dynamic
IP Address= N/A
ENET ENCAP Gateway= N/A
Press ENTER to confirm or ESC to cancel:
Get this information from
the telephone company. Get
the other information from
your ISP.