ZyXEL Communications Prestige 643 - Manual (Page 92)

Prestige 643 ADSL Router
6-10 IPX Configuration
FIELD DESCRIPTION
Active Choose Yes to activate and No to deactivate this static route.
Network # This field contains the internal network number of the remote server that you wish to
access ([00000000] and [FFFFFFFF] are reserved).
Node # This field contains the address of the node on which the server resides. If you are
using a Novell IPX implementation, this value is [000000000001].
Socket # This field contains the socket number on which the server will receive service requests.
The default for this field is hex [0451].
Type # This field identifies the type of service the server provides. The default for this field is
hex [0004].
Hop Count This field indicates the number of intermediate networks that must be passed through to
reach the remote node.
Tick Count This field indicates the time-ticks required to reach the remote node.
Gateway Node In this field, enter the number of the remote node that is the gateway for this static
route.
Once you have completed filling in the menu, press [ ENTER ] at the message “Press ENTER to
Confirm…” to save your configuration, or press [ ESC ] to cancel.