ZyXEL Communications Prestige 643 - Manual (Page 70)

Prestige 643 ADSL Router
4-6 Remote Node Configuration
protocol is stronger than specified. If you encounter the case where the peer disconnects right after a
successful authentication, please make sure that you specify the correct authentication protocol when
connecting to such an implementation.
4.1.4 Editing PPP Options
To edit the remote node PPP options, move the cursor to the Edit PPP Options field in Menu 11.1 –
Remote Node Profile, and press [SPACE BAR] to select Yes. Press [ENTER] to display Menu 11.2, as
shown next.
Figure 4-3 Menu 11.2 - Remote Node PPP Options
The following table describes how to configure the PPP options fields.
Table 4-2 Remote Node PPP Options Menu Fields
FIELD DESCRIPTION EXAMPLE
Standard PPP Encapsulation Choose CISCO PPP only when this remote node is a
Cisco machine; otherwise, select Standard PPP.
Compression Choose Yes to turn Stac Compression on or No to
turn Stac Compression off. No
(default)
Once you have completed filling in Menu 11.2 – Remote Node PPP Options, press [ ENTER ] at the
message “Press ENTER to Confirm…” to save your configuration, or press [ ESC ] at any time to cancel.
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
ENTER here to Confirm or ESC to Cancel:
Press Space Bar to Toggle.