ZyXEL Communications Prestige 643 - Manual (Page 87)

Prestige 643 ADSL Router
IPX Configuration 6-5
Table 6-1 Novell IPX Ethernet Setup Fields
FIELD DESCRIPTION OPTIONS
Seed Router Choose Yes if your Prestige is to act as a seed router; otherwise, choose
No. No
(default)
Frame Type Choose Yes to enable or No to disable the individual frame type.
Enable only the individual frame types that are actually used on your
network. Frame types are 802.2, 802.3, Ethernet II and SNAP. No
(default)
IPX Network
# If your Prestige is a seed router, enter a unique network number for each
frame type enabled.
Press [ ENTER ] at the message “P ress ENTER to Confirm…” to save your configuration, or press
[ ESC ] at any time to cancel.
6.4 LAN-to-LAN Application With Novell IPX
A typical LAN-to-LAN application uses your Prestige to call from a branch office to the corporate
headquarters enabling the stations in the branch office to access the NetWare servers at the headquarters, as
depicted in the next figure.