ZyXEL Communications Prestige 643 - Manual (Page 90)

Prestige 643 ADSL Router
6-8 IPX Configuration
FIELD DESCRIPTION EXAMPLE
W/D Spoofing
(min)
SAP/RIP
Timeout (min)
Dial-On-Query
This field is for the Prestige on the server side. Your Prestige can spoof
a response to a server’s WatchDog request after the connection is
dropped. In this field, type in the time (number of minutes) that you
want your Prestige to spoof the WatchDog response.
This field indicates the amount of time that you want your Prestige to
maintain the SAP and RIP entries learned from this remote node in its
internal tables after the connection has been dropped. If the
information is retained, then your Prestige will not have to get the SAP
information when the line is brought back up. Enter the time (number of
minutes) in this field.
This field is necessary for your Prestige on the client side. When set to
Yes, any Get Service SAP or RIP broadcasts will trigger your Prestige
to make a call to that remote node.
3
(default)
3
(default)
No
(default)
Once you have completed filling in the Remote Node Network Layer Options menu, press [Enter] to
return to Menu 11.1. Then press [
ENTER ] at the message “Press ENTER to Confirm...” to save your
configuration, press [ ESC ] to cancel.
6.4.2 IPX Static Route Setup
Similar to IP, IPX static routes tell the Prestige how to reach servers beyond a remote node before a
connection to that remote node is established.
Step 1. Type in 12 from the main menu, to displaly the following screen.
Figure 6-6 Menu 12 - Static Route Setup
Menu 12 – Static Route Setup
1. IP Static Route
2. IPX Static Route
3. Bridge Static Route
Please enter selection: