Yamaha SRCP - Manual (Page 165)

10-
19
10
OTHER OPERA
TIONS
10-6 Using a Memory Card
10-6-4 Viewing the ID number for memory card data
1) Insert the memory card into the TPB.
2) On the initial screen, press F3 (SYS).
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
[SYS]
select menu
1PRM 2B.UP3INIT
[SYS-B.UP]
select menu
1SAVE2LOAD3FMT 4ID
[B.UP-ID]
AREA 0 : 03.09.01
AREA 1 : 03-09-10
AREA 2 : 03.10.11
4next
3) Next, press F2 (B.UP).
4) Press F4 (ID).
Press F1 (CARD) before pressing F4 (ID)
if the SRCP controller version is 24.10 or later
and the TPB version is 12.51 or later.
5) The ID number of each area is displayed on the
screen.
To check the saved status in AREA 3 onward,
press
STEP
UP
or STEP
DOWN to scroll the screen. To re-
turn to the screen in step 4, press ESC .