Yamaha SRCP - Manual (Page 161)

10-
15
10
OTHER OPERA
TIONS
10-6 Using a Memory Card
7) If data already exists in the area specified in
step 5, a confirmation message appears.
To overwrite the data in the selected area, press
F1 (yes).
To change the selected area, press F2 (no).
[B.UP-SAVE]
AREA 1 already saved
delete OK ?
1yes 2no
[B.UP-SAVE]AREA 1
make identification
ID=_
effective key[0
→9-.]
[B.UP-SAVE]AREA 1
save OK ?
ID=03.10.01
1yes 2no
[B.UP-SAVE]AREA 1
saving ...
[SYS-B.UP]
select menu
1SAVE2LOAD3FMT 4ID
8) Set an ID number for the data being saved.
Using the number keys (0 to 9), the "-" (minus)
key, and the "." (period) key, enter a number of
up to eight characters and then press
.
9) A confirmation message appears.
To save the data, press F1 (yes).
To cancel, press F2 (no).
10)This screen is displayed while the data is being
saved.
11)When saving is finished, the screen returns to
step 4.
c
CAUTION
Never eject the memory card during saving of data.
Do not leave the memory card inserted into the TPB when not in use. This shortens the backup battery life.