Zoom X5V - Manual (Page 49)

Chapter 3: Advanced Setup Options 49
other than 10.0.0.16, in which case you should enter the number
that you chose instead of 10.0.0.16. When done, close the Window
and you will be prompted to click Save. Then
continue with
Step 6.
IP address 10.0.0.16
Subnet mask 255.255.255.0
Router address
(X5v’s LAN IP address)
10.0.0.2
Name server addr. 10.0.0.2
5 5 5 5 Red Hat Linux Users:
a
a a a
Edit /etc/sysconfig/network-scripts/ifcfg-eth0 so that it
contains the following lines:
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
BROADCAST=10.0.0.255
NETMASK=255.255.255.0
IPADDR=10.0.0.16
GATEWAY=10.0.0.2
NETWORK=10.0.0.0
b b b b Then edit or create /etc/resolv.conf so that it contains
the following line:
NAMESERVER=10.0.0.2
Note: If you are using another version of Linux and you are unsure
how to enter this information, consult the help file or
documentation that came with your operating system.
cccc Continue with Step 6.