Zoom X5V - Manual (Page 39)

Chapter 2: Voice Over IP Settings 39
have VoIP to PSTN service, you can forward VoIP calls from the
X5v to the PSTN.
The command sequence to control call management is simple. We
have included a sample table below. On your telephone keypad,
enter
# #
The X5v will attempt to place a call to the Forward Number.
If someone answers within 15 seconds, the forwarding feature will
become active. If not, you need to re-enter the command:
# #
Then the forwarding feature you have selected will become active.
You will hear a stutter dial tone while call forwarding is active.
Sample Table of Enable/Disable Codes
Function USA UK
Forward All * 7 2 * 2 1 *
Forward Busy * 7 4 * 6 7 *
Forward No Ans * 7 5 * 6 1 *
Forward Deactivate * 7 3 # 2 1 *
Call Waiting Disable *7 0 # 4 3 #
To deactivate Call Forwarding, enter
# < Forward Deactivate code > #
Note: Deactivating call forward from the keypad only deactivates the
last phone number programmed—that is, the currently active
forwarding function. It does not turn off the X5v’s call forwarding
capability. This must be done from the X5v’s Supplementary
Services page or by your service provider.
To deactivate Call Waiting, enter
# < Call Waiting Disable code > #
Now go to Section 1.6 Calling Tips on page 16.