Xerox 721P85530 - Manual (Page 364)

SPECIFYING DYNAMIC JOB DESCRIPTOR ENTRIES (DJDES)
8-34 XEROX DOCUPRINT 180 LPS PDL REFERENCE
CANCEL
Cancels, effective on the current page, the hold (automatic
reimaging) specified by the H parameter of an IMAGE or GRAPHIC
parameter.
Syntax CANCEL = option(s)
Options Table 8-18 lists the parameter option(s) and definition(s).
COLLATE
This parameter specifies whether collated or uncollated mode is to
be used. It takes effect at the next page boundary but must occur
prior to the first data record of the report. In duplex processing
COLLATE=NO is ignored.
Syntax COLLATE = option(s)
Options Table 8-19 lists the parameter option(s) and definition(s).
Table 8-22. CANCEL parameter option(s) and definition(s)
Option(s) Definition(s)
( name
1
[, name
2
][,...]
)
name identifies the graphic(s) being held.
ALL Specifies that all graphics being held are to be
cancelled.
Table 8-23. COLLATE parameter option(s) and definition(s)
Option(s) Definition(s)
YES Specifies that report copies are to be printed in
collated mode.
NO Specifies that report copies are to be printed in
uncollated mode.