Xerox 721P85530 - Manual (Page 203)

PRINT FORMAT COMMANDS
XEROX DOCUPRINT 180 LPS PDL REFERENCE 6-37
UCSB
This parameter specifies UCSB options.
Syntax LINE UCSB = option(s)
Options Table 6-31 lists the parameter option(s) and definition(s).
VFU
This parameter specifies VFU options.
Syntax LINE VFU = option(s)
Options Table 6-32 lists the parameter option(s) and definition(s).
Table 6-31. UCSB parameter option(s) and definition(s)
Option(s) Definition(s)
IGNORE Suppresses the host transmitted universal character
set buffer (UCSB). If IGNORE is coded, the CODE
parameter of the VOLUME command defines the
character translation. For online systems only.
PROCESS Accepts UCSB for PROCESS, use of a FOLDED or
UNFOLDED translate table is controlled from the
host system. For UNFOLD, characters not defined as
printable in the UCSB are converted to blanks.
The default is PROCESS.
Table 6-32. VFU parameter option(s) and definition(s)
Option(s) Definition(s)
vfu-id The command identifier of the VFU table, which must
precede this reference to it. (Refer to the “Defining
print line positions” section.) The VFU table defines
print line positions corresponding to skip-to-channel
parameters for the job to be processed.
NONE Indicates that any skip-to-channel parameter is to be
replaced by a carriage control of print and space 1.
The default is NONE.