Defining clusters and stocksets with pdl and djde, Pdl commands, Djdes – Xerox 721P85530 User Manual
Page 161
DEFINING CLUSTERS
XEROX DOCUPRINT 180 LPS PDL REFERENCE
5-5
Defining clusters and stocksets with PDL and DJDE
The PDL commands and DJDEs listed here relate to clusters. For
more detailed information on each command, refer to the chapters
“Specifying output parameters” and “Specifying dynamic job
descriptor entries (DJDEs).”
PDL commands
The STOCKSET and OUTPUT commands specify cluster and stocks
in your JSLs.
The STOCKSET and OUTPUT commands and their syntax are
shown in tables 5-2 and 5-3.
DJDEs
The FEED and STOCKS dynamic job descriptor entries change
stocks and clusters on a page-by-page basis.
The FEED and STOCKS commands and their syntax are shown in
table 5-4.
Table 5-2.
STOCKSET parameter(s) and option(s)
Parameter(s) Option(s)
ASSIGN =
{
stock-descriptor
|
(
stock-descriptor
1
[,
stock-
descriptor
2
][,...])}
INIFEED =
{
stock-name
|
stock-reference}
SYSPAGE =
{
stock-name
|
stock-reference
|
MAIN
|
AUX}
Table 5-3.
OUTPUT parameter(s) and option(s)
Parameter(s) Option(s)
FEED =
{
stock-reference
|
(
stock-name
|
MAIN
|
AUX
|
OPR}
STOCKS =
stockset-name
Table 5-4.
STOCKSET parameter(s) and option(s)
Parameter(s) Option(s)
FEED =
{
stock-reference
|
stock-name
|
MAIN
|
AUX
|
OPR}
STOCKS =
stockset-name