Xerox 721P85530 - Manual (Page 173)

PRINT FORMAT COMMANDS
XEROX DOCUPRINT 180 LPS PDL REFERENCE 6-7
REP
This parameter specifies that the first data page delivered to the bin
following a printer jam recovery or a system crash may be offset from
the rest of the report.
Syntax ABNORMAL REP = option(s)
Options Table 6-8 lists the parameter option(s) and definition(s).
SECURITY
This parameter specifies that certain operator functions are
restricted.
Syntax ABNORMAL SECURITY = option(s)
Options Table 6-9 lists the parameter option(s) and definition(s).
If SECURITY is invoked in a selected JDE, such as a DJDE JDE, the
SAMPLE and SPACE PAGES restrictions do not take effect until
after the first page of the report has been imaged (or spaced past).
Recovery
The automatic recovery procedures of the LPS are based on the
availability of valid checkpoint data independently saved by both the
output processor and the input processor. As a result, most
recoveries are performed with no operator assistance. In certain
cases, the system may detect that the checkpoint data is invalid, and
Table 6-8. REP parameter option(s) and definition(s)
Option(s) Definition(s)
NO Specifies that the page will not be offset.
YES Specifies that the page will be offset.
Table 6-9. SECURITY parameter option(s) and definition(s)
Option(s) Definition(s)
YES Specifies the following system level parameters (as
described in the
DocuPrint 180 LPS Operations
Reference:)
• SAMPLE (sample print)
•
MOVE BLOCKS (block spacing of tape input)
•
SPACE PAGES (skipping over output pages).
NO Specifies that none of the above restrictions are in
effect.
The default is NO.