Xerox 721P85530 - Manual (Page 274)

PRINT FORMAT COMMANDS
6-108 XEROX DOCUPRINT 180 LPS PDL REFERENCE
RTEXT
This parameter specifies text to be printed on a separate page
preceding a report (or copy ply).
Syntax ROUTE RTEXT = option(s)
Options Table 6-80 lists the parameter option(s) and definition(s).
Table 6-81. RTEXT parameter option(s) and definition(s)
Option(s) Definition(s)
sc | ( sc,[passnum | ALL],
[ line,[col[,fontindex]]])
This option has the following components:
• sc
Specifies the message to be printed (1 to 132
characters). It is printed with the first font
specified in the FONTS parameter of the PDE
command (refer to fontindex).
• passnum
May be either an integer number or the keyword
ALL. An integer number specifies the pass
(copy ply) to which the text applies.
• ALL
Specifies that the text applies to all copies. If
there is more than one RTEXT parameter in a
DJDE packet, passnum must be in increasing
numeric order.
The default is passnum = 1.
• line
Specifies the line number on which the first line
of a block of RTEXT message is printed. The
default is line 1 for the first text string of the
pass. Otherwise, the default is the next line of
the page. Only one RTEXT parameter may be
specified per line for a passnum.
• col
Specifies the column number at which the first
character of a block of RTEXT messages is to
be printed.
The default is column 1.
• fontindex
Identifies the index (starting with 1) of the PDE
font with which the text is printed.
rtext-id This option is used to reference a cataloged file of
RTEXT parameters previously compiled by PDL.
NONE Specifies that no text is to be printed on a separate
page.
The default is NONE.