Xerox 721P85530 - Manual (Page 250)

PRINT FORMAT COMMANDS
6-84 XEROX DOCUPRINT 180 LPS PDL REFERENCE
XSHIFT
This parameter specifies whether the image of the form and data on
a page is to be shifted, and if so, by what values. This parameter is
used to shift the image of the data for two-hole paper, binding,
finishing, and edgemarking. XSHIFT allows shifting in the x-direction
for short-edge binding.
Syntax OUTPUT XSHIFT = option(s)
Options Table 6-69 lists the parameter option(s) and definition(s).
Example INVPDE: PDE PMODE=PORTRAIT,
BEGIN=(1.3,.37),
FONTS=P0612A;
INVJDE: JDE;
OUTPUT INVERT=BACK,
SHIFT=YES,
XSHIFT=-40,
FORMAT=INVPDE,
PAPERSIZE=(8.5,11);
Table 6-70. XSHIFT parameter option(s) and definition(s)
Option(s) Definition(s)
NO Specifies that no shift occurs.
value An integer that specifies a shift amount on the front
and back side. The shift is in the x-direction and each
dot is 1/300 of an inch. The allowable range is 75 to
-75.